Last Tuesday a few people were asking about the light and jaws I used.
The light can be purchased from a company called Woodart –
www.woodart-products.co.uk
The jaws are the 75mm bowl jaws from Teknatool code N0.6014
These can be purchased from Dave Biven via Peter

Sorry for the delay – My computer started typing backwards – again!

Please note the date for the Sharpening workshop should be July not June as published last Tuesday.

Notices – December 2015

Tonight the demonstration is by Roger and it will be a simple box with an inlaid lid
The competition, following last month,s demonstration is a Toy Car with Turned wheels that turn!
The wood of the month is Rhododendron presented by Jake.

As we do not have a meeting in January our next club meeting will be on the 9th February and Rolf will be taking us through Easy bowls part 1
The competition, following tonight’s demo will be a box with an inlay for experienced turners and a simple box for beginners.
The wood of the month is a Banskia nut .

Next years programme is now available as well as the club nights and professional demonstrators we will be running three Workshop Tutorial days. These will be
o 13th March ~ Wood preparation
o 10th July ~ Sharpening
o 25th September ~ Boxes
Spaces on these day will be limited so please sign up as soon as possible – forms on the notice board.

The Committee has been asked about the possibility of running an afternoon session in the winter months for those who are retired. The main problem with this is getting somebody to run the session and be responsible. If you would be interested in an afternoon session please see a member of the committee and we will see if we can get a volunteer to be responsible.

Following a discussion at the committee we have decided that next year the wood of the month will be shared out among members. Jake has volunteered for this evening and Judith will be doing Bog Oak in March but we need volunteers for the other months. If we don’t get volunteers then names will go into a hat. All that is required is to talk about the merits of the wood as it relates to turning – it takes about 5 mins max and most of the information can be gleaned from books or the internet.

We now have 5 people interested in a beginners course so we will be starting a further course towards the end of January. If there is anyone who would like to join a course please see Roger.

I have had an e mail from a member of Grampian Woodturners ( Mark Cowan) who has started up a group on facebook called Scottish Woodturners and Crafts which you are invited to have a look and join if this would be of interest to you.

Who is Richard Raffan?

• Internationally renowned Australian professional wood turner.
• Acclaimed for his gallery-quality work and his teaching.
• Author of books and magazine articles.
• The club has a Richard Raffan bowl on permanent loan from David and Judith.

His book on turning toys

• Book, “Turning Toys with Richard Raffan”, discusses basic wood turning techniques.
• And wood turning tools
• Basic safe workshop practices ~ Reprinted in Woodturning Magazine September 2015 pp 83 – 85
• Safe design
• And then goes on to projects.

Safe Design

• Avoid choking hazards.
• Rules vary by country
• He uses a 1¾” hole in a scrap of wood as a guide.
• Very difficult to find out British Standards without shelling out £300+ for a full copy of the rules, but we have found a small parts cylinder ~ see post on club website.
• If selling you can’t make a toy obviously for a toddler, then cover yourself by saying not suitable for under 3s.
• No sharp points.
• Smooth surfaces.
• Non toxic paints.

Templates

• He advocates the use of homemade templates for ease of sizing different components.
• I made one for sizing the diameters of the drivers, front wheels and rear wheels.

His toy cars consist of

• Axles
• Wheels
• Car body
• Driver and perhaps passengers.

He Suggests

• Experiment with cheap wood to determine the size/proportions of the car you want to make.
• Age of the child?
• Potential use as a weapon against siblings?
• Don’t use lignum vitae! Lighter wood is better, ash or sycamore.

Car Body

• Don’t intersect driver hole with axle!.. I did!

Show marked Block,

• we homed in on these dimensions, but they are not sacrosanct. 
• Block                     40 x 45 x 150mm ash
• Doesn’t have to be square,
• oblong may make a wider car for 2 people to sit beside each other.
• wider and longer may make a bus.
• Driver position       45mm from rear
• Axle position         15mm from base, 40mm from front, 20mm from rear.
• Holes drilled 1” for driver/passenger, axle holes 0.5mm bigger than axle.
• If a flat boot lid is required ~ bandsaw a section off first.
• If a recessed grill or exhaust is required ~ Forstner drill in Bench drill first.
• Off centre turning ~Steb centre, (or spur centre), determined the position of rotation ~ on centreline 15mm from base.
• make sure you leave enough room for the steb centre or spur centre to get a good grip.
• I showed an early example which was not turned enough off-centre and  became a cylinder.
• Further off centre, get a flat bottom.

Demo of body making

• Sand to the finish you require, depending on whether you’re going to paint it or not. 

Wheels

• Whole chapter on wheels.
• Axle options.

Sizes

• Front            45mm dia.
• Rear             55mm dia.
• People          1” dia ~ determined by the Imperial Fostner drill set we have!

Demo of wheel making

• 15mm wide, hole depth 10mm, tread/no tread ~ inside against car body a little concave?
• Rough cylinder to right size, mark the width, then using tool of your choice (skew, spindle gouge), turn the wheels.
• Drill the hole before it’s parted off. Use a depth stop or measure very carefully and mark your drill.

People 

• 1” dia body with 1”diameter head could make 25mm if you prefer, or any safe size.
• Piece of wood, rough it to size, shape the head and body,
• can make a shapely lady if you’re so inclined, (and have a good imagination!)

Axles

• He can make narrow spindles ~ sometimes using odd tools.
• I bought 6mm doweling from TAS in Castle Douglas. (our sponsors)
• Rolf says this is not sturdy enough and 12mm oak axles are better!
• G&S Specialist Timber, Penrith sell dowelling in a large range of different timbers and diameters.

Finish

• Paint…non-toxic
• Or food safe oil
• Or Treatex, which is toy safe, and will give a lasting finish.
• Add transfers, but cover with sealer of some kind if for a young child who may pick them off.

To find the toy safety cylinder test referred to in the Toy Car Demonstration please follow this link;

http://www.bsieducation.org/Education/14-19/developing-testing/tests/cylinder.pdf

 

Buy yourselves an early Christmas present! We now have suppliers of T-shirts and woodturning smocks with the new club logo:

Details are on the Resources page. Add your order to the forms on the workshop noticeboard.